威海叉車司機需要掌握的操作事項！

安全是人類生存和發展的基本條件。安全是商業活動中重要的問題。預防事故的概念應該深入到日常工作的每一個環節。叉車作為特種設備，必須經過安全培訓，然后才能由獲得叉車操作證書的人員駕駛。通過組織安全培訓來加強司機的安全意識。威海叉車租賃一直反復強調，作為一名叉車司機不管你是不是新手，都要嚴格掌握并按照下列事項操作：
safety is the basic condition for human survival and development. safety is the most important issue in business activities. the concept of accident prevention should be penetrated into every aspect of daily work. as a special equipment, forklift trucks must undergo safety training before they can be driven by professionals who have obtained forklift operation certificates. strengthen safety awareness of drivers by organizing safety training. tianjin forklift truck rental has repeatedly stressed that as a forklift driver, whether you are a novice or not, you must strictly grasp and operate according to the following matters:
1、貨叉低端距地高度應保持300-400mm，門架須后傾。
1. the height of the fork should be kept at 300-400mm, and the gantry must be backward.
2、開車時不要把貨叉舉得太高。進出作業現場或開車時，注意上面是否有障礙物。負載移動時，叉車不允許升得太高，這會影響叉車的穩定性。
2, do not lift the fork too high when driving. when entering or leaving the work site or driving, notice if there are any obstacles on it. when the load is moving, the forklift truck is not allowed to rise too high, which will affect the stability of the fork lift truck.
3、卸貨后應先降落貨叉至正常的行駛位置后再行駛。
3, after unloading, you should first drop the fork to the normal driving position before driving.
4、轉彎時，如果附近有行人或車輛，應首先發出駕駛信號。禁止高速急轉彎。高速急轉彎會導致車輛失去橫向穩定性并翻倒。
4, turn corners, if there are pedestrians or vehicles nearby, they should first send out driving signals. no sharp swerve. high speed cornering will cause the vehicle to lose lateral stability and overturn.
5、行駛叉車在下坡時嚴禁熄火滑行，非特殊情況禁止載物行駛中急剎車。
5. driving forklift is strictly prohibited from flameout and sliding when downhill. no special cases are prohibited from braking.
6、威海叉車租賃叉車在運行時要遵守廠內交通規則，必須與前面的車輛保持一定的安全距離。
6. tianjin forklift rental forklift truck must keep a safe distance from the vehicle in front of it in order to comply with the traffic rules in the factory.
7、叉車行駛時，負載必須處于不妨礙行駛的低位置，并且門架應適當向后傾斜。除堆疊或裝載外，不得增加負載。
7. when the forklift truck is running, the load must be in the lowest position without hindering the driving, and the gantry frame should be properly inclined backward. no load can be added except stacking or loading.
8、載物高度不得遮擋駕駛員視線。特殊情況物品影響前行視線時，倒車時要低速行駛。
8, the height of objects should not obstruct the driver's view. when special circumstances affect the line of sight, slow down when reversing.
9、禁止在坡道上轉彎，也不應橫跨坡道行駛。
9, prohibit turning on ramps or crossing ramps.
10、叉車廠區安全行駛速度5公里/小時，進入生產車間區域必須低速安全行駛。
10. forklift truck factory area safe driving speed 5 km/h, enter the production workshop area must be low-speed safe driving.
11、威海叉車租賃的叉車在升降或行駛時，禁止人員站在叉車上搬運物品并起到平衡作用。
11. forklift trucks leased by tianjin forklift trucks are prohibited from standing on forklift trucks to carry goods and play a balancing role when lifting or driving.
12、發現問題及時檢修和上報，絕不帶病作業和隱瞞不報。
12, find problems, timely overhaul and report, never bring sick work and hide not report.